Removing Cold Start

[gannycat]

I have removed the cold start control together with its cable. I have had to take part of the Facia off as well which is samwiched between the handle and the cable. The handle will not undo to allow me to remove the facia. Is the handle on a thread, if it is it will not turn even with pressure. 

I have removed the control since the end cable has broken.  Would it be possible to join the two pieces of cable? I could then replace the facie and control cable.

Your thoughts would be appreciated.

Tony

[lagain]

To remove the cold start handle, undo the large nut behind the handle in the car, disconnect from the connector on the air cleaner and the cable should come out. speedycables.com/ may be able to repair / replace it for you.