|
Post by pipetech on Apr 14, 2019 6:25:45 GMT
Hello everyone , I'm now ready after fitting new sills and rear inner wings and a fair bit of other welding etc... to finally get on with fitting my JAG frond end. I've tried to view nods mods pictures etc on this but they don't come up anymore, I've also messaged nods mods but no reply so I don't know if he's still working or not. Is it possible to view his pictures at all. It just gives me some tips that's all. Thanks in advance.
Len
|
|
|
Post by enigmas on Apr 14, 2019 8:21:53 GMT
|
|
|
Post by pipetech on Apr 16, 2019 21:07:02 GMT
Many thanks for that, much apreciated. I remember seeing them a couple of years ago and I thought thatl be useful. As usual these things have taken longer to get done than I first estimated. Now I do remember at the time that there was writing to go with the pics etc paining what Neil had done and why, is this info available or are we on pictures only. As I'm doing the work this weekend time is of the essence as they say. But many many thanks indeed.
Len
|
|
|
Post by enigmas on Apr 16, 2019 22:15:41 GMT
The text may still exist on the original post Len. The text was not of a technical nature more of a description of what Neal was doing.
|
|
|
Post by pipetech on Apr 16, 2019 22:37:05 GMT
Okay Well the pictures are a great help. Do we know if the car was ever finished? As I say I've tried to contact him but no look. Thanks again.
Len
|
|
|
Post by enigmas on Apr 16, 2019 23:00:22 GMT
I have no idea. The car belonged to a 'well known' musician who wanted to remain anonymous so Neal would not devulge his identity. It certainly hasn't turned up on the Rover CC register in OZ AFAIK. Money didn't seem to be an issue on the build. Just do it and do it right. That's why Neal got the job. Fitting the engine transmission combo, Radiator, the power steering rack, the Jag front suspension is all his work. The rear suspension someone elses and not up to his standards. I imagined he would have fitted a coil over shock 4 link rear end if he'd been commissioned to do it...rather than retain leaf springs.
|
|
|
Post by pipetech on Apr 17, 2019 21:28:15 GMT
Hi, yes the rear end does seem not a good match for the front, I've got a jag is for mine but doing the front first. Thanks again. If Neil does at sometime see this post it would be good to hear from him.
Cheers Len
|
|
|
Post by Roy of the Rovers on Apr 24, 2019 12:36:31 GMT
Hi, yes the rear end does seem not a good match for the front, I've got a jag is for mine but doing the front first. Thanks again. If Neil does at sometime see this post it would be good to hear from him. Cheers Len Hi Len, drop a note to 'Wozzer' on here, he had a 4 link system made for the back and an independent front suspension clip made for the front of his P5 and fitted them both with an airbag system. His project is in 'Modifieds' . Roy
|
|
|
Post by pipetech on Jun 5, 2019 18:29:31 GMT
Hi I've tried several times to contact nods mods, and after searching Wozzer no results?
|
|
|
Post by Roy of the Rovers on Jun 6, 2019 12:54:16 GMT
Hi, Wozzer has a thread running in the modified section of this forum. If not then pm me your email/phone and I'll pass it on to him for you. Roy
|
|