Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 1, 2013 12:04:21 GMT
Good Morning folks
the club has the chance to get 1:43 scale models built and personalized to the members car. how would the members of the club feel on this. we would have to make a minimum purchase of at least 10 at a time but we are looking for feedback from everyone first
many thanks
Paul Mckay
Hampshire Regional rep
Events Co-ordinator
|
|
|
|
Post by Dean Hovland on Nov 1, 2013 15:20:40 GMT
Sounds like a nice idea ,, cost ?
|
|
tonys
Rover Fanatic
Posts: 419
|
Post by tonys on Nov 1, 2013 21:12:13 GMT
Good idea; perhaps a coupé if possible, as there have been a few saloon models in the past, but not many coupés. As always, cost would be a consideration.
|
|
|
|
Post by newboy on Nov 1, 2013 23:16:50 GMT
Good idea; perhaps a coupé if possible, as there have been a few saloon models in the past, but not many coupés. As always, cost would be a consideration. Ditto for me on both points. |
|
|
|
Post by Simon H on Nov 1, 2013 23:24:45 GMT
Does that mean a minimum quantity of 10 all the same? Or a minimum of 10 units of mixed saloon / coupe styles and colours?
Simon H
|
|
|
|
Post by Mr Pelham on Nov 2, 2013 6:15:01 GMT
Sounds good! A decent quality model replica of my car (minus its faults) is something that i would very much like!
Thanks for looking into this so far, and I hope you get more encouragement to proceed.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 2, 2013 8:29:56 GMT
Could be interested.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 3, 2013 15:15:05 GMT
If the club go for it then you will have choices.
Saloon or coupe
Single or dual colour
With or without a webasto sunroof
Sunroof open or closed
With your own colour interior and number plate
Left or right hand drive
All included in the price which all depends on how many we order and if supply meets demand
|
|
|
|
Post by Mr Pelham on Nov 3, 2013 20:08:09 GMT
Impressive...... Feel free to highlight and underline my interest! Would they even be able to match my cars fairly uncommon colour scheme (zircon roof over silver birch) or will there be a pre-ordained set of colour schemes??? My pen is already poised over my cheque book!
|
|
mjb59
Rover Fanatic
Posts: 311
|
Post by mjb59 on Nov 3, 2013 20:24:20 GMT
I'm interested if you can ship to Australia and if I can have it mounted in its current natural state on axle stands. The stands are yellow.
Seriously, I would be interested.
|
|
|
|
Post by Rodney the Rover on Nov 3, 2013 20:36:43 GMT
I would also be interested but only if Harrington's don't supply the bumpers  |
|
|
|
Post by gilbern on Nov 5, 2013 11:23:40 GMT
Paul, I would be interested in this club venture.
Thanks Julian
|
|
|
|
Post by stantondavies on Nov 10, 2013 0:22:25 GMT
If the club go for it then you will have choices. P5 and P5B? If so I'm in for one. |
|
|
|
Post by cyf on Nov 19, 2013 8:07:28 GMT
I would also be interested but only if Harrington's don't supply the bumpers  As a guinea pig ,I'll order a set of SS plastic bumpers and let you know I'll be interst in a model as a gift for a friend. He own a LHD unicolor blue coupé |
|
|
|
Post by Jens Munk on Nov 20, 2013 10:27:39 GMT
Certainly the P5B and in particular the Saloon.
Browsing eBay and presumably any other source for Rover items, there are quite a few Mk I, II, and III model cars and as such the prices are very reasonable. There are very few P5B's and consequently when one occasionally appears the prices are very high (> £100)
(Yes, I have a P5B Saloon and yes I am too cheap to buy one at the prices I find)
Jens.
|
|
|
|
Post by guidedog on Nov 20, 2013 11:26:30 GMT
Hi Paul,
I also would be interested in a P5B coupe colour to be determined, its in the shop now.
I already have one model left hand drive with Netherland plates. Produced by Neo scale models.
|
|
|
|
Post by Chuck Berry on Nov 20, 2013 18:07:16 GMT
I would certainly be interested in a P5 3ltr Coupe model, with if possible the optional spot lights and badge bar and ........
.....and before anyone comments - I haven't taken the picture yet of them fitted, lights that is. the brackets are being powder coated at the moment.
|
|
|
|
Post by Roy of the Rovers on Jan 31, 2014 13:45:35 GMT
I could be interested.
|
|
|
|
Post by cyf on May 19, 2014 6:55:02 GMT
Any update?
|
|
|
|
Post by Roverboy on Feb 3, 2015 20:21:41 GMT
Hi is there any updates of the availability of these models if so whats available and where can I purchase one
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 4, 2015 20:59:44 GMT
Hi all sorry but the gent who was making them seems to have disappeared I will in the not to distant future try and find him and find out
|
|
As a guinea pig ,I'll order a set of SS plastic bumpers and let you know
