rear inner and outer c post

[jeffbarnes49]

hi can anyone help i need some pics of rear c post door shut areas i have fitted some wadhams panels and they have a small lip on them sticks out a little is this supposed to be there or are they supposed to be smoothed off or rounded back towards the wheel hopefully someone knows what i mean it is a bit difficult to explain many thanks

[eisdielenbiker]

Hi,
tonight i can have a look in my ancient files from welding exactly this area using the JRW panels in 2009.
They are possibly on flickr.com , account name RoverP5B .

www.flickr.com/photos/roverp5b/15062800810

www.flickr.com/photos/roverp5b/15062911277/


raw condition

The lip is basically alright. It has only been bent behind the area that is covered by the rear wing. The foam door seal works better with the lip. You see the mark in the rubber foam that divides dirt from clean area.

Mark

[petrolhead allan]

Hi Jeff. I fitted Wadham's 'D' posts some years ago. They are just like those in the pictures in the previous post, and to answer your question, the lip was just the same as the original, and therefore is correct.

[jeffbarnes49]

Sept 15, 2014 14:16:06 GMT eisdielenbiker said:

Hi,
tonight i can have a look in my ancient files from welding exactly this area using the JRW panels in 2009.
They are possibly on flickr.com , account name RoverP5B .

www.flickr.com/photos/roverp5b/15062800810

www.flickr.com/photos/roverp5b/15062911277/


raw condition

The lip is basically alright. It has only been bent behind the area that is covered by the rear wing. The foam door seal works better with the lip. You see the mark in the rubber foam that divides dirt from clean area.

Mark

[jeffbarnes49]

hi thanks for pics that is exactly what i wanted it will be a big help thanks very much