|
Post by Tim Goddard on Mar 16, 2019 11:17:39 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM.
|
|
|
Post by dhb5610 on Mar 16, 2019 13:22:01 GMT
They look a bit different to that when they come fresh from Wadhams
|
|
|
Post by dhb5610 on Mar 16, 2019 15:28:53 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM.
|
|
|
Post by dhb5610 on Mar 16, 2019 15:32:36 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM. Iv'e just been looking at the photos of my Rover when it went through it's restoration and as I recall the fillets fit in place above the splash seals
|
|
|
Post by johnwp5bcoupe on Mar 16, 2019 16:12:47 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM. They just sit above the top hinge Tim, they just fill the opening I am assuming you mean the spongy rubber ones?
|
|
|
Post by Tim Goddard on Mar 16, 2019 16:20:12 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM. They just sit above the top hinge Tim, they just fill the opening I am assuming you mean the spongy rubber ones? Yes John, they are curved foam and about 3" long.
|
|
|
Post by johnwp5bcoupe on Mar 16, 2019 16:21:46 GMT
Yes they just fit (push in) in the space Tim
|
|
|
Post by Tim Goddard on Mar 16, 2019 16:21:49 GMT
Would anyone have a picture showing the position of the foam front wing fillets? They were missing on my wings and I can't see anything in the WSM. Iv'e just been looking at the photos of my Rover when it went through it's restoration and as I recall the fillets fit in place above the splash seals Thanks for taking the trouble to look at your pics. That's very helpful.
|
|
|
Post by Tim Goddard on Mar 16, 2019 16:52:03 GMT
Yes they just fit (push in) in the space Tim Thanks John
|
|
|
Post by dhb5610 on Mar 16, 2019 16:55:12 GMT
Iv'e just been looking at the photos of my Rover when it went through it's restoration and as I recall the fillets fit in place above the splash seals Thanks for taking the trouble to look at your pics. That's very helpful. Mine didn't have the fillets either and it was only when I was on Wadhams site looking for parts I realised I needed them and lots of other bits too. When will yours be back on the road?
|
|
|
Post by lagain on Mar 16, 2019 18:58:07 GMT
Here is a picture. This foam has been in place since 28th February 1971 Foam retains water so can cause corrosion, make sure that the area is well painted !
|
|
|
Post by Phil Nottingham on Mar 16, 2019 22:35:22 GMT
All our P5s and P5Bs had them but no corrosion as they are closed cell foam. I cannot see any point in having them however in the 1st place.
|
|
|
Post by Warwick on Mar 17, 2019 2:16:52 GMT
They look a bit different to that when they come fresh from Wadhams Whoops! I completely misunderstood the question. (Apologies, Tim. I couldn't resist the temptation. Time to delete my contribution and return to the serious topic.)
|
|
|
Post by Tim Goddard on Mar 17, 2019 8:32:57 GMT
Here is a picture. This foam has been in place since 28th February 1971 Foam retains water so can cause corrosion, make sure that the area is well painted ! Ah ha, so that's where it goes. Thanks for clearing that mystery up for me.
|
|
|
Post by Tim Goddard on Mar 17, 2019 8:34:36 GMT
They look a bit different to that when they come fresh from Wadhams Whoops! I completely misunderstood the question. (Apologies, Tim. I couldn't resist the temptation. Time to delete my contribution and return to the serious topic.) No worries Warick. I'm a vegetarian, but i wasn't offended 😁
|
|