Post by p5tgc on May 7, 2005 16:04:01 GMT
In theory your plan should work, as would screwing the new switch IN by the same number of turns you UNscrewed the old one.
I say in theory, because there could be slight internal differences between the two items and the detent in the selector mechanism may have worn over the years, so the workshop manual is the only guaranteed way of getting the set up right.
I say in theory, because there could be slight internal differences between the two items and the detent in the selector mechanism may have worn over the years, so the workshop manual is the only guaranteed way of getting the set up right.