|
Post by Phil Nottingham on Dec 11, 2004 20:24:00 GMT
Ray Picket - Regional Rep wrote on old Board
Chaps/chapesses, Sorry it took so long but I got back to my Tracking man today. Rover P5's should be set to 1/16th toe-in; (with a tolerance of 1/16th). This will mean on one side it could be neutral and on the other 2/16ths to-in. He says because of all the play in that style of steering, a P5 has it must be set and then have the wheels/steering moved and then check again, and if needed re-set again and checked again ...until the setting are found to have settled. This is exactly what he did with mine. On some equipment these settings may show as 1.6mm. He showed me a national magazine article he put in a mag. I asked if he could do one for us and he's agreed. I'll get this for Take-Five. Also he will run a tracking day for us. We can take the P5's along one Saturday from 12:00 (they shut at 12:30) He will then do a talk and demonstration of the 'Hunter Digital Wheel Alignment' machine works and go on to talk all about steering etc., he says it would last about 2 hours. This will be in Worthing W/Sussex. I thought I'd wait till the weather gets better. Anyone fancy the trip? Maybe sort some sea-side event after? Your thoughts & comments will be noted. Cheers Ray
;DYes I have agree and am trying this now
|
|