martinbay1
Rover Rookie
1971 P5B Coupe
Posts: 20
Location: Hailsham, East Sussex
|
Post by martinbay1 on Feb 21, 2017 14:48:33 GMT
I've a hole in my bucket bumper, does any know where I can get decent repair with re-chroming in the East Sussex area? Thanks
|
|
|
Post by daveh on Feb 21, 2017 15:52:49 GMT
i had the same problem on a p5 and found the cost very high and decided to go for a set of stainless bumpers from Harrington anouther thought have you contacted David Green to see if he has a good bumper in stock
|
|
martinbay1
Rover Rookie
1971 P5B Coupe
Posts: 20
Location: Hailsham, East Sussex
|
Post by martinbay1 on Feb 21, 2017 16:04:48 GMT
Thanks, I'll try David Green.
|
|
|
Post by Roy of the Rovers on Feb 22, 2017 11:30:53 GMT
I've a hole in my bucket bumper, does any know where I can get decent repair with re-chroming in the East Sussex area? Thanks Hi Martinbay, you are a local! Most decent chroming companies should be able to perform repairs, in fact any decent body shop should be able to cut out and weld in a section for you and leave it flush for chroming. On facebook I often see pictures submitted by Classic Car Chroming in East London. I haven't used them but they show some pretty amazing metal bumper repairs prior to rechroming. We have a monthly pub meet in Upper Beeding and a couple of people come from Hastings and Eastbourne. One of them had his chroming done by a different company in London and was very happy with it (but not cheap). I can find out for you where that was? You should come along.. 2nd Weds at the Kings Head in upper beeding from 8pm... Roy
|
|
martinbay1
Rover Rookie
1971 P5B Coupe
Posts: 20
Location: Hailsham, East Sussex
|
Post by martinbay1 on Feb 22, 2017 14:52:27 GMT
Thanks Roy, I'll try to get there.
|
|
|
Post by Warwick on Feb 23, 2017 0:44:16 GMT
Does anyone have a n/s tail light lens they would consider selling, or know where to source one? Also, I am missing the stainless trim that fits above the clock on the left hand side. Anyone have one to sell? Maybe the club has one and having recently joined, but not having had my access code yet, I can't check what might be available. regards, Tarnowl. Tarnowl, You should repost your request in the Parts for Sale and Wanted section. It will probably go unnoticed here in a thread on repairing bumpers. (Admin - done)
|
|