|
Post by Tim Goddard on Nov 9, 2021 9:54:27 GMT
Hi, would anyone have any recommendations for reattaching the heated rear window power feed connector to the screen? Originally I guess it would have been soldered. Mine has broken off and I really don't want to replace the screen just for this. I have tried soldering it, but it's very difficult to get enough heat in to it.
|
|
|
Post by Phil Nottingham on Nov 9, 2021 13:50:48 GMT
I have never heard of any successful repair - its not uncommon on all such screens. Conductive paint is not firm enough - perhaps metal filings body filler may be but the Styrene may not take the heat
|
|