|
Post by Sam Bee on Feb 8, 2019 21:55:11 GMT
I am removing the facia completely. Part of that is dealing with the Facia Crash Rail Trimmed Assembly and the Interior Windscreen Moulding. shown in Parts (pages 1909 and 1842), with nuts and screws mentioned, but absolutely nothing to be found in the W/S manual. Not obvious where to start. Any words of wisdom appreciated.
|
|
|
Post by dmaxwell on Feb 9, 2019 0:29:31 GMT
It's been a few years and on P5, not the V8 but if I remember right there were two screws on the bottom that came out to remove the entire instrument cluster.
David California
|
|
|
Post by johnwp5bcoupe on Feb 9, 2019 8:49:59 GMT
I am removing the facia completely. Part of that is dealing with the Facia Crash Rail Trimmed Assembly and the Interior Windscreen Moulding. shown in Parts (pages 1909 and 1842), with nuts and screws mentioned, but absolutely nothing to be found in the W/S manual. Not obvious where to start. Any words of wisdom appreciated. Sam do you mean the Black Facia that goes across the top of the dash? my parts book is different to yours!
|
|
|
Post by johnwp5bcoupe on Feb 9, 2019 10:45:04 GMT
|
|
|
Post by Sam Bee on Feb 9, 2019 22:36:34 GMT
John, yes, the full width of the car.
|
|
|
Post by Sam Bee on Feb 9, 2019 22:46:56 GMT
What an excellent diagram, just what I needed.
|
|