|
|
Post by westoz on Jul 2, 2024 2:37:07 GMT
Hi All. I am desperately seeking a steering pump pulley to suit a p5b v8. Mine came loose/off and damaged itself and shaft in process. I have a rebuildable pump but need the pulley and have not been able to source one in Australia so far. Happy to pay fair price and postage costs to 6450 Western Australia. Pulley is 125mm diam and about 50mm deep. My motor was replaced with an sd1 block but l think pump will be the same. TIA Regards Tim.
|
|
|
|
Post by Mike’S-a-loon on Jul 2, 2024 2:58:34 GMT
Have you tried Mark Richmond in Ballarat?
Worst case scenario, if you cant get one, a local small engineering shop will be able to sleeve yours and cut a new keyway.
|
|
|
|
Post by westoz on Jul 2, 2024 23:54:48 GMT
Unfortunately Mark does not have one. I have spoken to a machinist and he recommends turning up a complete new pulley due to the restricted hub design. The cost is eye watering compared to what you should pay for a second hand pulley. Surely there is one somewhere it the World?
|
|
