miguel
Rover Fanatic
Posts: 462
|
Post by miguel on Aug 10, 2008 21:53:58 GMT
Hi, Yesterday I started with the measurements of the chassis. Regarding Height measurements, I really was prepare not to trust them due to the springs and shock absorbers, but in fact the values are higher than the described on WM. Values are given first the LH followed by RH Height A1-G1: 342mm 342mm A2-G1: 228mm 230mm A4-G1: 235mm 238mm A5-G1: 405mm 405mm
Lenght B1-B2: not possibible to measure B3-B4: 280.5mm 281.5mmm (worring) B5-B6: 125.6mm 125.6mm
Diagonals D1-D2: 193.0mm 193.5mm D2-D3: 145.3mm 145.9mm D3-D4: 190mm 190mm
There are 2 measures missing. I´ll redo them all to confirm. Thanks Miguel
|
|