|
Post by enigmas on Sept 2, 2008 9:43:13 GMT
Hey guys, I've created this little topic as the Volvo Power Steering Box to P5 topic may be too esoteric or anal for some traditionalists on the Board, but perhaps traditionalist or not someone out there has a stripped front subframe.
My request is for a picture of the Rover P5 (model doesn't matter) subframe focusing on the steering box mount holes and that general area. The image would need to be taken so that any distortions are minimized, preferably as viewed from the front PS wheel and no higher than the top front shock absorber mount.
Any assistance on this matter would be gratefully appreciated. ~ Vince
|
|
|
Post by enigmas on Sept 3, 2008 14:13:30 GMT
Done. Thanks Eric.
|
|
|
Post by enigmas on Sept 9, 2008 8:18:17 GMT
Eric, I've forwarded you my email address. Hopefully this one arrives.
I've also learned something else... the splined fitting on a manual P5 gearbox is smaller than the power steering pitman arm.
|
|
|
Post by enigmas on Sept 10, 2008 13:23:17 GMT
Thanks Eric, I received the pix and will post one of your images on the tech page dealing with the Volvo box.
|
|